Ukulungiswa kweentsimbi ngaphandle kokupenda - luhlobo luni lobuchwephesha kunye nokuba lunokusetyenziswa ekhaya?

Phantse bonke abahamba ngemoto babhekana neentsimbi emzimbeni wakhe womhlobo wesinyithi. Imoto eneempembelelo ezifanayo ayibonakali nje imbi, kodwa iphinda ilungele ukubola. Ngako oko, ukwenza imoto ibonakale ihle kwaye ikhangele, abaniniyo bazama ukulahla ingxaki leyo ngokukhawuleza. Kwaye namhlanje siza kujonga indlela udoti olulungiswe ngayo ngaphandle kokupenda.

Ukuphonononga kunye nencoko ye-PDR

Akumangalisi, kodwa le ndlela yokuphelisa ukutshatyalaliswa kuye yaqhutyelwa eNtshonalanga ukususela kuma-70s ekhulwini lokugqibela. Ngexesha elifanayo e-Russia le teknoloji ithathwa njengento entsha neyenamhlanje. Inzuzo ephambili yale ndlela, ngokwempahla yabanini bemoto, lixesha lokuphelisa ukubola. Emva kwayo yonke into, nokuba neentsholongwane ezinzulu ziphela ngokupheleleyo kwiiyure eziyi-1.5-2 zomsebenzi wenkosi. Ngelo xesha, imoto ayifuni ipeyinti ekhethekileyo kunye ne-putty. Kodwa kusenziwa nakwezinye iindibano zokusebenzela. Kodwa into enomdla kakhulu, iindleko ze-PDR umsebenzi wokubuyiselwa ngamanye amaxesha ziphantsi kunezo zenziwa ngu-SRT kunye nokupenda. Oko kukuthi, umzimba wale teknoloji uhlala kumzobo waso, umzobo wefektri. Ewe, kwaye ukulungiselela kwangaphambili ukuthengiswa kokusetyenziswa kwile ndlela kunenzuzo kakhulu. Ngakwelinye icala - ngokukhawuleza, kodwa kwelinye - ngokukhawuleza.

Into ebalulekileyo yile msebenzi yile ndlela ilandelayo. Ngaphakathi kwendawo eyonakalisiweyo, ithuluzi elikhethekileyo (i-microlift) lisetyenzisiweyo kwisinyithi esisiqhoqho, esikhokelela ekubuyiselweni kwendawo echotshoziweyo ngokwayo. Ngokuxhomekeke kwinqanaba le-deformation, umsebenzi unokwenziwa ngaphandle nangaphakathi ngaphakathi komzimba.

Kufuneka ukuba uqaphele ukuba, ngaphezu kwe-microlift, inkosi isebenzisa isiseko esisisiseko sezinto ezithengiweyo, ezivumela ukubuyiswa ngokufanelekileyo nokuchanekileyo kwendawo yesitye esingonakaliyo. Zonke zivela kwisithombe esingezantsi.

Njengoko uyakubona, iimveliso zibude obude kunye nobukhulu. Ngenxa yobume babo bangena kwiindawo ezingenakufikeleleka zomzimba. Kwimeko apho ukufikeleleka kwi-toit kuphelelweyo, iteknoloji yokubambisana iyasetyenziswa. Kule meko, i-piston iboniswe kwicandelo elikhubazekile, elidibanisa isinyithi "kwiimvumi" kunye nazo zonke ezinye izitho zomzimba.

Iindawo eziMfama

Kubalulekile ukuba uqaphele ukuba ukuba umphezulu weentente unemigibe okanye imichiza, loo ndawo kuthiwa yimfama. Kwaye inkulu enkulu indawo yalezi ziqwenga eziphosakeleyo, kunzima kakhulu ukufezekisa ukuchaneka kokulungiswa nokubuyisela umsebenzi wepeyinti kwiplastiki. Ukuba i-scratch imncinci, iphathwa nge-eamel ekhethekileyo yokuphosa ngefuthe lokunciphisa. Izikali zenziwe ngetoni ngeLKP. Kwakhona kwenzeka ukuba kwintsimbi kwakukho imizobo yepeyinti kwezinye iimoto - kule meko nazo zipheliswe kwi-varnish yomshini obuyisiwe.

Uphi i-PDR iteknoloji engenamandla?

Ngelishwa, akuyiyo yonke into enokubuyiswa ngayo ngoncedo lokucima. Ngokomzekelo, iteknoloji ye-PDR ayinamandla ngetsimbi ephosakeleyo kakhulu okanye ipeyinti eyonakaliswe kakhulu. Kule meko, ngaphandle kwe shpaklevki kunye nepeyinti ayinakuyenza. Oko kukuthi, xa kungekho luhlu lwepeyinti kwintsimbi, i-PDR iya kuba yinto engasebenzi.

Malunga nobukhulu beentente

Njengoko satshilo kwangaphambili, i-dental straight without paintings ifumaneka kuphela ukuba isinyithi asiyikubola. Njengoko kuqhuba ukubonisa, iteknoloji ye-PDR isebenza kuphela kumonakalo ophezulu ukuya kutsho kuma-4-5 cm (kwaye ukuba kuludwe olufunekayo lwe-5%). Ukuba umonakalo ubaluleke kakhulu, ngoko-masters basebenzisa ezinye iindlela zokubuyiselwa.

Apho akunakwenzeka ukulungisa imibala ngaphandle kwepeyinti?

I-teknoloji ye-PDR ayinakuze isetyenziswe ekubuyiseleni iminyango yemoto (ngaphandle kokuba kungabikho ukubola kwaso ngaphandle kokuqhawula), imida yebhonet, ukugqithwa kwephahla kunye neentambo ezibukhali, imida ye trunk kunye neengcango, kunye namacandelo awonakaliswe kwiphaneli eyenziwe ngenxa yempembelelo kunye ne-skewing Umzimba. Nangona kunjalo, ukuba i-dent ayiyi ngaphantsi (ngaphantsi kwama-cmentimitha angama-5) kwaye ayichaphazeli izixhobo zomzimba ezibhalwe ngasentla, akukho mqondiso wokubuyisela usebenzisa ubuchwepheshe be-PDR. I-Paint kunye nentsimbi emva komsebenzi uhlala uphelele kwaye uphelele.

Ukukhutshwa kwetsimbi yokubuyisela ekhaya - ngaba yinyani?

Ngelishwa, akunakwenzeka ukuba ulungele i-dents ngaphandle kwepeyinti ekhaya ngenxa yezizathu ezilula. Iindleko zenye i-microlift eneesethi zokusetyenziswa zingenani i-ruble ezingama-70. Ngako oko, kuya kuba kunengqiqo ukufaka isicelo ngoncedo kumasifundisane, apho iingcali zengcali ziza kwenza ukukhishwa kwekhontrakthi yamathambo ngaphandle kokupenda. Ukuthengisa kwiivenkile kunye nezixhobo ezincinci zokubuyiselwa kwe-vacuum, nangona kunjalo, umphumo onjalo, ofezekisiwe nge-microlift kunye nezixhobo zokusetyenziswa, awukwazi ukufezekiswa-kubalulekile kwakhona ukubeka upende uze upende ubuso, kodwa ngezandla zabo.

Ngoko, safumanisa ukuba yiyiphi into yokulungisa ngaphandle kwepeyinti kunye nendlela le ndlela yokubuyisela isebenza ngayo.